Chemic Engineers

1668/DPVCM On-site A

1668/DPVCM On-site A

2005 Capital Budget

Provide initial scoping and estimates for client's capital budget items.

KOH Storage Capacity Increase Project

Detailed engineering & design (Mechanical, structural & I&E). This project consisted of installing a new KOH storage tank, pump and foundation for both with all new piping. This project was developed to add more capacity for the KOH product.

Reactor E-6101 Replacement

EDC Reactor replacement structural steel modifications. Concrete structure and steel structure.

On-site drawing scans

On-site drawing scans

Coffeyville CO2 Recycle

Detailed design for piping a compressor and exchanger and running the discharge up the sides of two 100 ft tall structures to tie in to the top of reactors.

Coker Logistic Project

Detailed engineering/design for mechanical, civil-structural & I & E. Design of new pump with foundation and manifold station. Project was developed to add more capacity of crude oil to existing tank in tank farm.

Cooling Tower #10 Phase 3

+/- 15% Construction estimate including cost of equipment, mechanical design, structural and piping in the refinery facility

Railcar Fall Protection

Update railcar gangways, safety cages and for loading Acid, Chlorine and decontamination. 6 spots.

B Neutralization Tank Project

HMD Project

Detailed piping design with I&E modifications for the shared second phase of the HMD project. Baytank assigned tasks for completion of construction package. Phase involved mechanical design of a small scrubber type vessel & flare piping revisions.

Nitrogen Cooling Tower Additions

Add cell for cooling tower basin. Basin was made of concrete slab & wall, once new cell was installed the existing concrete basin wall was core drilled (3-20"0 holes). For cooling water circulation to the new basin.

40-08510 Orifuels

Dual skid design for overseas client. 1170GPM Naphtha H2S Prewash Technology. Diluents Caustic Wash Technology Project.

AWT Formulation Project TIC

10% total installed costs for AWT formulation project.

E&C Pkg. Witte Class

Detailed design for installation classifer.

Mag Sulfate Feed Structure

Structual and civil engineering for three story structure associated with the expansion of client's hydro process.

T6 Tank Foundation and Grounding Grid

Detailed design for foundation ground and grid mixing support structure for a 30 ft batch mixing tank.

New Filter Press and Hydroplant

Process, structural, anc civil detailed design for installation of two filter press trains and related infrastructure.

Priller Feed Pump & Piping

Provide revised construction package and installed one additional new Priller unit

Priller Feed Pump & Piping

Provide construction package on balance of plant piping with steam blister, pumps, structural pipe bridge and utilities /power supply in sulphrur terminal facility

Net Absorber Bottoms Stripper

Add Column to Process Stream

Ball Mill Platform Analysis

Chemic’s scope was to create a single line drawing for the existing second and third level between column lines 1&2 and A&B. . Also, Structural and foundation analysis was done.

Net Absorber Bottoms Stripper

Add Column to Process

FETT Test Facility PH2-A

Mechanical, Civil, Electrical, and Instrumentation detailed design for LMS-100 Turbine Genterator test facility.

Quench Tower

Adding new quench tower.

Quench Tower Platforms - A

Quench tower access platforms around quench tower at four levels and at top nozzle. As well as all duct works associated with the project.

HMD-Tank 87-01 PWO-0522

Detailed piping design, shared project w/Baytank. Project for retrofit an existing storage tank for the purpose of switching products (HMD). Chemic was assigned P&ID pickups, piping design work outside the tank "bay", pipe rack piping runs, rail car

Truck Scale and Paving Projects

Paving for plant entrance and installing a truck scale for weighing trucks when they come in and out. Also, to record the delivered material in to the plant.

1710/LPVCM "C" Hot Quench Column A

Brick lined reactor replacement with like kind. Total station survey. Vendor fabrication drawing review. Oxyhdrochlorination Hot Quench column. 12'-3" dia. X 37'-10" T/T