Chemic Engineers

1710/DPVCM V6004B Support Calcs-A

Sphere leg support calculations due to corrosion issues. Repair design developed.

HIMO One Pass 1.5

Designed additional tee supports based on pipe stress calculations.

Upgrade Heater 02 Analyzers

Disigned Upgrade for Heater 02 Analyzers, including Nozzle Additions to Heaters and Platform for Access.

40E1 Exchanger Replacement

40E1 Exchanger replacement, like for like.

Benzene Line Upgrade to Lab

Designed Piping upgrade for Benzene Line.

T48 Dike Area Elevation

Surveyed T48 inside Dike Area elevations and provided Plan Drawing w/Elevations. TIC Estimate for raising inside elevation to take area out of "Confined Space" Requirements.

Formalin 83R1 Redesign Screen and Support Grating

Formalin 83R1 Redesign Screen and Support Grating

Install Dip Tube LI38 on T56-2

Designed Nozzle installation for Dip Tube LI38 on T56-2.

Verify Emergency Relief System

Verify emergency relief systems for vessels, make reccomendations as required to meet Standards.

De-Superheating Water Let Down

Designed Piping for installation of de-superheating water letdown valve.

55T16 Clean Out Ports

Designed Clean Out Nozzles on cone bottom of Tank.

1668/DPVCM On-site A

1668/DPVCM On-site A

51D3 Feed Tank 51T14 Replace

TIC Estimate for Feed Tank Replacement.

70R101-2 Install Sample Valve

Installed sample valves at cyclone steam quench connections.

Pull 70XV411

Pulled 70XV411 and replaced with Spool Piece, 84" Diameter Piping.

Replace Nitro Purge #24

Replaced nitrogen purge with a fuel gas purge.

On-Site Services

N/A On-site

Distribution Safety Showers

TIC Estimate for the addition of three new Safety Showers.

On-Site Services

N/A On-site

On-Site Services

N/A On-site

On-Site Services

N/A On-site

Truck Rack Safety Upgrades

Designed Tie Off System for Loaders AT Truck Rack.

320T302 Vent Additions and Nozzle, Piping Additions

Designed 320T302 Vent Additions, including Nozzle addition and Piping revisions.

Shutdown Interlock Testing

Provided Shutdown Interlock Testing and Documentation.

Onsite Piping Designer

Onsite Piping Designer

1710/LPVCM Loop Reactor PH1

LTC Reactor replacement with like kind. Total station and conventional field verification. Vendor drawing review. Vessel calculations review. Piping modifications. Field construction follow-up.

Relief Valve Change Recommendation for Both 320T247-1&2

Designed Relief Valve Changeout for 320T247-1&2, including inlet and outlet piping.

Repair Bank Erosion Docks

Designed repairs to Docks Bank to prevent Erosion.

Redundant Temp. Transmit to 321TIC113 & 321TI112 for control XV114

Designed Redundant Temp. Transmitter System to 321TIC113 & 321TI112 for control of XV114.

Resize the Lube Oil Coolers on C504-1&2

Resized the Lube Oil Coolers on C504-1&2

Install Tie Header at Dock 3 for Toluene Barge Loading

Designed Tie-in on Header Dock 3 for Toluene Barge Loading.

LPVCM-Onsite

LPVCM-Onsite

Isopentane / Isopar-E Project

Detailed engineering & design (Mechanical). This project consisted of revising existing piping adding block valves and control valves to change the routing of the existing piping system.

Flare Vent Line

Detailed engineering & design (Mechanical & structural). This project consisted of the piping design of a new flare vent line to replace the existing vent system. The existing piping rack system was modified to support the new line.

IWPF Tank Sludge Cleaning

Process Evalution. TIC Estimate for Solids Removalfrom Tank.

On-site LPVCM

On-site LPVCM

EDC Meter Stations

EDC piping pig launchers and receivers, Micro motion flow meters.

336SU12A & 12B Inst. Mod. And Upgrade Request

Designed upgrade Instrumentation for Sump Level Controls.

Hot Tap Toluene Unit Make Line

Designed Hot Tap installation for rerouting piping.

Relocate 50# Steam to Reactors Flow

Designed Piping to relocate 50# Steam Flow.

Install a DP Type Level Device on C101 Lube Oil System

Designed installation of DP Type Level Device on C101 Lube Oil System. Including new Nozzle Oil Tank.

2 New Temp Transmitters

Designed Piping and Instrumentation to install 2 new Temperature Transmitters.

Improve 70H401 Superheat Section Reliability (DeSuperHeater)

Designed Piping for installtion of DesuperHeater, Spec'd DesuperHeater.

Landfill Cell #5

Calculations for Fill Area if Access Ramp relocated.

Temporary Crude AN Receiving

Design temporary piping for unloading Crude AN.

Aluminum Transfer Facility Appraisal

Update EFD'S for 350 Area

Perform EFD Walkdowns and update all files to CAD.

T670 Emissions

Detailed engineering and design (Mechanical). Project consisted of re-routing existing piping and PSV's for the existing flare/vent system.

Move P805-3 to P805-2 Location to Facilitate Barge Loading from T804

Designed piping for relocation of Pump.

DPVCM-Ethylene / Propylene Interchangers

New exchanger steel modifications for additional loading.

Pipe Ditch/Overhead Rack Survey & Identification

Survey and document Piping in Ditch/Overhead Racks for Maintenance purposes.

P1 TF and R/C Pipe Rack Mod.

Pipe rack new level extension for additional piping. Foundation and steel calculations with detail design. +/-1000LF.

Reactor E-6101 Replacement

EDC Reactor replacement structural steel modifications. Concrete structure and steel structure.

Install Bridge at "G" street and Dock Road

Designed Bridge for Ditch crossing.

Install PCV's on Equistar's Light Product storage tanks

Designed Piping to install PCVs on N2 Piping to Tanks.

Bridge #10 Repair

Designed repairs for Bridge Columns and Footers.

Replace Sections of NESHAP Piping pre MTS Recommendations

Designed replacement piping for corroded piping, like for like.

Dike Wall Erosion Repairs

Designed repair for leak in concrete Dile Wall.

Construct Elevated Platform in Pipe Rack South of 70C101

Designed Platform for Pipe Rack.

On-site drawing scans

On-site drawing scans

Repair Damageg Structural & Piping at 70XV114-2 (S/D 104)

Designed repairs for damaged structural steel and piping.

70C101 Air Compress System Repairs, 24" Steam Line to C101

Stress Calculations on 24" Steam Line, designed Stop & Support to prevent damage..

Install platform around T16

Designed access platform around T16 for Clean Out Nozzles.

Install Piping to Pump from 320P805-2 around 320P805-3

Designed Piping for Product Transfer Pump.

Design & Install Seal Pot w/Alarm to Control House from 320P976-2

Designed Piping and Seal Pot w/Alarm to Control House.

Replace Pilot Ignition System on Reactor Air Heater

Replaced pilot ignition system on reactor air heaters.

Middle Rack Secondary Containment-Preliminary Engineering & Estimate

TIC Estimate and Front End Engineering.

70T105 Explosion Hatches

Designed Explosion Hatches for Tank.

Document/Redline/Change 24VDC Power Distribution

Updated Unit Documentation on 24 Volt Power System

PO Rail Unloading at U1

R/C unloading rack expansion. Structural steel modifications with new gangway and cage. Piping modifications to include new control station, Micro motion flow meter and loading arm for Propylene Oxide.

Set up 70E202-3 as a Spare 70E503

Reworked piping so that existing exchanger could be used as spare for another service.

HCL Replacement

Demo existing HCL system and replace with H2504 Tote System.

Repair Nat Gas Line (E & 7th St. Area)

Designed repairs for natural gas line (E & 7th street) area.

March 2006 HPDA Outage Work

Designed Piping to replace 4 existing instruments with upgraded instruments.

Platform for portable water filters

TIC Estimate and Design for Access Platform.

Hot stopple of 350T1-2 connecting line

Designed installation of cross stopple for installation of piping and valves for tank.

Cost Estimate for 320T161's Radar Access Platform

TIC Estimate for 320T161's Radar Access Platform.

Cogen Desecrator Tank Replacement

Structural steel modifications for vessel replacement. R/R corroded steel with new.

320T823-3 Piping Revisions

Designed Piping modifications on tank to install N2 Blanket..

Replace Sump Line Between

Designed replacement of Sump Line.

CL2 Suction Chiller

Chlorine chiller expansion pot. Cold service piping and stress analysis. Four new pumps and control stations.

P1 Sugar Feed to D-101

Structural steel modification for pneumatic sugar feed to reactor to sustain piping and bag house on top of reactor.

LPVCM-Railcar Fall Protection

Update railcar gangways, safety cages and for loading VCM, Chlorine and R/C cleanout. 8 spots.

Railcar Fall Protection

Update railcar gangways, safety cages and for loading Acid, Chlorine and decontamination. 6 spots.

Re-route 10 PSV's back to 320T971-1

Designed piping to re-route 10 PSV's outlet piping back to 320T971-1.

Acid Purge

TIC Estimate forAcid Purge Revisions. Project Canceled.

450# Steam Line Sleeper Repair "F" Street

Designed in Structural repair for broken Concrete Sleeper.

On-site LPVCM

On-site LPVCM

Waste Water Compliance Project

Designed Slab for Instrumentation

Replace the "C" Street Domestic Sewer Line

Designed the replacement piping for the "C" Street Domestic Sewer Line.

Replace Domestic Sewer Line from S2 Sump

Designed the replacement piping for the S2 Domestic Sewer Line.

HRVOC

Emission control mechanical detail design project. New control station, piping, revisions.

Culvert Replacement

Design Culvert replacement and area Grading for Drainage.

Absorber Off Gas Revisions

Design Double Block and Bleed by adding 30 inch butterfly valve

Interlocks

Update and verify interlock types, service, and descriptions.

DPVCM Paid Verification

+/-250 P&ID as builts. Field walk down for Mechanical and I&E. CAD updates. VCM plant.

Conduct Expansion Loop Calc. on the 450#

Conduct expansion loop calculations on the 450# steam headers, including the conditions When Unit is exporting 700 degree steam into the header.

Change 55PCV108-1/2/3 to Butterfly Control Valves

Design replacement piping to change control valves to butterfly type valves.

MP Boiler Feed water Pump Recirculation Line

Redesign piping for boiler feed water pumps for better work clearances.

70T204 Settling Revisions

Design new overflow system for Settling Tank.

Fee Support for R&D Relocation

Fee Support for R&D Relocation

Demo Out of Service Electrical on the Docks

Cleaned up the electrical on dock 4.

Reverse Osmosis Tank Outage

Repaired tank and nozzles, reworked piping for streamlined operations.

Hydraulic Study of Cooling Tower System

Preformed Hydralic Study of efficiency of Unit Cooling Tower Water System.

Install Cross Stopple on the 450#s STM Line

Design installation of cross stopple on the 450# steam line in "F" st. pipe ditch for Maintenance.

Relief Systems Phase II

PSV (relief valve) verification and documentation.

Contractor Administrative - Chemic RSO

Client manager

HMD Project

Detailed piping design with I&E modifications for the shared second phase of the HMD project. Baytank assigned tasks for completion of construction package. Phase involved mechanical design of a small scrubber type vessel & flare piping revisions.

HRVOC Monitoring Compliance Project

Designed Nozzle connections on Flares for Flow Instrumentation Installation and design barricades for Instrument Boxes.

STS Equipment Conversion

Updated EFD and Equipment Documentation after Demo of Unit for all Equipment that was saved and reused. Renumbered Equipment and Drawings as required.

83E13 TIC Upgrade

Upgraded temperature controllers.

La Porte VCM Paid Verification

+/-150 P&ID as builts. Field walk down for Mechanical and I&E. CAD updates. VCM plant.

On-Site Services

N/A On-site

P&ID Updates

+/-100 P&ID as builts. Field walk down for Mechanical and I&E. CAD updates, PVC unit.

Nitrogen Cooling Tower Additions

Add cell for cooling tower basin. Basin was made of concrete slab & wall, once new cell was installed the existing concrete basin wall was core drilled (3-20"0 holes). For cooling water circulation to the new basin.

T311 Low Water Draw and Recycle Line Revision

Modified piping to do away with low water draw on tank.

On-Site Services

N/A On-site

Modify Docks 2 & 3 Flush Headers & Sample Pts

Designed new piping on dock 3 to make sure there is not cross contamination of Products.

Add Zeolite Waterline to 83S14

Run new 2" stainless steel pipe and change out part of zeolite water pipe.

T56-1 Storage Tank Repair

Converted manual drawings of Tank to CAD, including coils, plan, and elevation. Update dimensions as required.

Install Flow Meters on 55E6'S

Replaced mass flow meters.

WHB Reliability Improvements

Upgraded gas controls.

Add Additional Venting Per Equistar to 320T92

Designed additional venting, including Nozzle and Conservation Vent.

Structural Steel, Grating & Floor Plate Replace

Structural steel, concrete and floor plate replacement.

Rupture Disc

CT3 Piping & Electrical Replacement

Piping and electrical replacement.

Repair Damaged Steam Piping

Draw EFD's of utility piping in "C" street ditch from 7th to DPO, complete turn in of all dwgs from outage.

Sulfuric Acid Line Replacement

Replace sections of sulfuric piping in ditches per MTS recommendations.

Pipe Stress Analysis for PTFE lined piping

Provide stress/piping flexibility for lined piping system between exchangers and check the alignment of PTFE expansion joint from overstretch and within the allowable offset.

On-Site Services

N/A On-site

Relay Coordination Project

Review existing system, one-line diagrams, coordination plots, relay settings/test sheets. Provide short-circuit study & analysis, plot new coordination curves, provide written report w/suggested changes in order to realize improvements in the system

P4 Tank Farm Expansion

Six finished Polyols product tanks. 100k gallon with positive displacement pumps, process area manifold modifications, T/T and R/C loading facilities with loading arms. Foundations, piping, and power scope.

Install Redundant XV's on 70K305-1 Drain Line

Designed installation of redundant Control Valves on the 70K305-1 drain line.

AWT Formulation Project TIC

10% total installed costs for AWT formulation project.

Revise Circulating Water Purge Piping

Revised circulating water purge piping.

PSV Header at VCM Tank Farm

VCM Sphere tank farm header thermal expansion PSV's and expansion pot. New design. Foundations and piping.

Formalin Tank Hi Level Improvement

Install new 2"-150 nozzles in existing tank manways. Install new Hi level probes and remove existing Hi level probes and install blind flanges as requied.

E&C Pkg. Witte Class

Detailed design for installation classifer.

HAZOP Related Project

Designed 30D5 filter drain revisions, 30RI vent revisions and 30T2 sulfuric acid revisions.

South Teal Unit # Ethylene Capping

South Teal Unit # Ethylene Capping

RCRA Line Repair

Replace section of pipe in ditch like for like.

Upgrade SO2 Flow Meters

Upgraded SO2 flow meters. Redesigned piping for new meters.

Dock 3 Piping Modifications

Replaced sections of piping under Dock 3 due to heavy corrosion.

MCS Sump Piping Replacement

Replaced the sump piping like for like with an updated spec.

Chlorine Transfer Line

Chlorine Transfer Line

On Dock 5

Redesigned piping to remove old emission points and unused PSV's and replace with new pipe.

D308 Bottoms to D203 Bottoms

Piping project canceled

51D6 TETF Alternate

Designed installation of 3" C.S. line from connection @ 51D6 to west side of unit (No pockets). A temporary scrubber will be supplied and shall connect to 3" line from 51D6

C4/Truck Flare Flow Estimation (85%)

Flare calculations for air permit application.

A300 Revisions

Designed new piping from Unit to 320T523 Storage Tank. Designed new piping for Benzene recycle line and new piping for a fresh benzene line.

Burner Assembly

Provide detail engineering design and fabrication drawings on special burner tip.

Enclosure for R-1002A&B Design

Enclosure on top of existing reactor structure. Add. steel structure framing, building roof & metal siding were added on top of existing reactor. For prevention of outside moisture reacting w/catalyst during installation of new catalyst in the reactor.

384 Interlock Reviews - Air Comp

Investigation of the existing interlocks in the new unit & developing a database with the end goal being the verification & documentation of all interlocks. SIS related items

369 Interlock Reviews - Super Turbine

Investigation of the existing interlocks in the new unit & developing a database with the end goal being the verification & documentation of all interlocks. SIS related items

350 Interlock Reviews - Boilers

Investigation of the existing interlocks in the new unit & developing a database with the end goal being the verification & documentation of all interlocks. SIS related items

Flare Replacement IMPR Phase 2 (Second part of 7010)

Detailed Design and Field Follow-up of Installation of Piping for Flare Replacement

Priller Feed Pump & Piping

Provide revised construction package and installed one additional new Priller unit

Priller Feed Pump & Piping

Provide construction package on balance of plant piping with steam blister, pumps, structural pipe bridge and utilities /power supply in sulphrur terminal facility

8000 Wire Revision

Update existing wiring diagrams

Relocate and Replacement of Flow and Pressure Transmitters

Detailed Design of relocation and/or replacement of Flow and Pressure Transmitters

Provide Personnel Resource (1 person) for Upcoming Shutdown

Provide Personnel Resource (1 person) for Upcoming Shutdown-Interlock Testing

Net Absorber Bottoms Stripper

Add Column to Process Stream

Fabrication Drawings Vertical Riser

MCC Startup Support

On-site personnel for activation of new MCC

Burner Management System Upgrade

Piping Revisions for Upgrade of Furnace Burner Management System

Sugar Silo FDN and Steel Design

Saturation Vessel Discharge Tube Modifications

Inspection Isometric Sketches

SKM Modeling of Plants Electrical System

Software modeling for Arc Flash Studies

Tank Replacement

CAD designer for P&ID markups

BEM Plant Expansion Front End Engineering Phase I

Provide Personnel Resource (1 Person) to coordinate effort for spares

Hot-spare set up - communication to CMG and Delta V

Epler & Gibson

Build Road Grating Crossing to Cover Exposed Piping at Dock Road

Replace Road Crossing Over Piping

Provide Personnel Resource (1 Person) for upcoming shutdown

Interlock Testing

Upgrade Ven System on 320T233-1

Replace N2 System on Tank

Fuel Gas Line, Hot Stopple and Line Repairs

Replace Bad Piping

Tars B Tank Replacement

Engineering Study for 478' long Pipe Rack Bridge

On-site Inspections Designer

EFD Update Project, Phase 2

Walkdown and Update EFD's

Flare Pilot Gas Lines - Part 1

Replace existing Piping

Provox Upgrade

Upgrade Provox System

Net Absorber Bottoms Stripper

Add Column to Process

Roof Modifications

Upgrade HCN Low Flow

Upgraded HCN flow meters. Redesigned piping for new meters.

Replace Raff II Barge Loading Pipeline

Replacement of existing piping with line size increase from 8 inch to 10 inch on new piping.

55R4 HCN Analyzer

Designed piping and instrumentation for installation of HCN analyzer.

Portable Water Line

TIC Estimates and Front End Engineering for replacement of Potable Water Piping.

Tank Farm Instrument Upgrade

Designed upgrades for Level Control Instrumentation.

HRVOC Analytical Test

TIC Estimates and design of installation of flanged outlets on flare stacks for Flow Instruments.

40R1-R2 Raw Materials Delivery

Design piping revisions for 40R1/R2 raw material delivery enhancement.

Absorber Off Gas Vent Revisions

Designed Double Block and Bleed by adding 30 inch butterfly valve

Flare Knockout Pot Revisions

Designed replacement can on Flare.

57T4 Reflux Tank Replacement

Designed additional steam tracing supply condensate return for vessel, Update P&ID's.

Install Sonar Device on 57T20

Install sonar device, including wire pulling from MCC and new junction box.

Boiler Fuel Gas Drawing

Replaced expansion loop in pipe ditch.

Demo NH3

Demo existing piping and reroute to remove existing ammonia drains from the "clean water" drains.

TSS Solids Analyzers

Modified piping and added instrumentation for analyzing process wastes.

Replace Line II 40E16& 40E32 Heat Exchangers

Replaced Exchangers like for like.

150# Steam Line Repairs

Replaced damaged Steam Piping, performed Stress Calculations as required.

Piping Modification on Propylene Pumps

Modified piping configuration to streamline operations.

Replace Plant Railroad Bridge

Acquired Vendors for Railroad Bridge Replacement. Helped w/TIC Estimate.

Replace N. / S. Clean Water Ditch Diversion Valves

TIC Estimate and Front End Engineering.

CWD Diversion Valves

Revision of concrete outfall dam to install slide gate valves, replacement of diversion gate valves, and removal of catwalk.

HMD-Tank 87-01 PWO-0522

Detailed piping design, shared project w/Baytank. Project for retrofit an existing storage tank for the purpose of switching products (HMD). Chemic was assigned P&ID pickups, piping design work outside the tank "bay", pipe rack piping runs, rail car

Repair Bank Erosion

Design repairs for bank erosion including Gunite installation on Banks, removal of sediment in ditch, and reworking drainage channels.

Update EFDs & Loop Drawings

Update formalin EFD's and loop drawings.

55H2 Burner Management Upgrade

TIC Estimate for upgrading Piping and Instrumentation Controls of Heater Burner System.

55H2 Burner Management Upgrade

Design upgrade for Piping and Instrumentation Controls of Heater Burner System, including Gas Flow Calculations..

Potable Water Distribution Header Study

TIC Estimate for replacement of plant potable water supply system.

Overhead Cyanide Pipe Support

Design repair of damaged Overhead Cyanide Pipe Support.

RCRA Tank Cert 336T1&2 and 336T2-1

PE Certification for tanks used in RCRA service.

C St Steam Lines Modification

TIC Estimates for redesigning the Plant 450# Steam Supply System. Installed thermowells for Temperature Instrumentation and Tie-ins for Future Piping.

377N3 Agitator

Replace gear box and agitator.

Propylene Area Tie Points

Cleaned up excess piping not needed with miscellaneous piping modifications.

Install and Test Thermo-Degasser for 30C2 Oil System

TIC Estimate for Installation and Testing of Portable Thermo-Degasser for 30C2 Oil System.

Install and Test Thermo Degasser for 30C2 Oil System

Designed piping for installation of Portable Thermo-Degasser for 30C2 oil System. Help with Testing Procedures.

Truck Scale and Paving Projects

Paving for plant entrance and installing a truck scale for weighing trucks when they come in and out. Also, to record the delivered material in to the plant.

1710/LPVCM "C" Hot Quench Column A

Brick lined reactor replacement with like kind. Total station survey. Vendor fabrication drawing review. Oxyhdrochlorination Hot Quench column. 12'-3" dia. X 37'-10" T/T

Install Mud Boot Cross Stopple on the 50# Steam Line

Designed installation of cross stopple in mud boot in the 50# Steam Line for Maintenance.

New T 315 CVO Assembly

Modified piping atop of tank to keep vent system from polymerizing.

57T5 Vent to 55H2 Furnace

Addition re-pulls of bad cable, redesign using interposing relays because of induced voltages.

On-site DPVCM

On-site DPVCM

PO/EO Railcar Loading Expansion

Civil engineering and piping detailed design for expansion of four railcar loading platforms and pipe racks, including retrofit of existing platform.