Sample Portfolio

Crosby, Texas

Chemic provided Engineering Detail Design and Construction Management services for a Chemical Client for the R100 and R200 Reactor Restart Project. The facility had been shut down for almost a year and needed to be remediated to bring it back online. Chemic also helped design the system to accommodate new process requirements when it was restored

TIC: 16MM

Straton Ridge, Texas

Chemic was requested to take over the Engineering and Design of this project from another Engineering contractor. The scope of this project was to design for the installation of the following major equipment: two 1500 hp Booster Pumps, one PDC Building, one Seal Skid, nine MOV’s. Chemic also Provided all C/S Designs required to support the installation.

TIC: 13.5MM

La Porte, Texas

This project designed a permanent fire water pump system to replace a temporary setup at a Chemical Tolling and Storage facility. The project required coordination with the site due to the new pump’s proximity to the Ship Channel. New platforms were needed to support the pump from the Clients property without putting any new structures in the Ship Channel or intruding on Barge traffic.

TIC: 2.5MM

La Porte, Texas

Chemic provided ASPEN process optimization services, Engineering and Design, Procurement, and Construction Management services and packages for TIC Estimating, Civil/Structural, IE&C, Piping, Mechanical, Process, and Equipment/Instrument Data Sheets for both FEED and Detailed Design / Execution for an industrial process expansion in La Porte, Texas.

TIC: 32MM

Crosby, Texas

Chemic provided conceptual study and FEL II TIC estimate, and full Engineering and Design packages for Civil/Structural, IE&C, Piping, Mechanical and Process as required for both FEL phase and Detailed Engineering phase for an industrial process expansion related to a boiler replacement in Crosby, Texas.

TIC: 12MM

La Porte, Texas

Chemic provided Engineering and Design, Procurement, and Construction Management services and packages for TIC Estimating, Civil/Structural, IE&C, Piping, Mechanical, Process, and Equipment/Instrument Data Sheets for both FEED and Detailed Design / Execution for an industrial process debottleneck in La Porte, Texas.

TIC: 68MM

Bayport, TX

Innovative solutions for replacing aging piping infrastructure while maximizing uptime and solving long-term issues.

TIC:  20 MM

Read More

Texas City, TX

A new smart modular design, and just-in-time delivery adds an additional layer of safety protection.

TIC: 13 MM

Read More

Bayport, TX

Chemic provided the required civil/structural, piping, mechanical, and instrumentation engineering and design for the installation of a new tank farm inside an existing facility at Bayport, Texas. The project included four API 650 375,000 gal storage tanks, facility design and tie-ins.

TIC:  8MM

LaPorte, TX

Chemic provided the process modeling and detailed design for the 20% expansion of a world scale chemical feedstock train inside an existing facility in LaPorte, Texas.

TIC:  32MM

Wheeler, TX

Chemic provided the engineering and design for the installation of a 150MMSCFD cryogenic plant on a greenfield site near Wheeler, Texas. Chemic project scope covered comprehensive engineering and detailed design for the project. The project includes three 4000HP Inlet Compressors, three 4000HP Residue Compressors and all the skids and off skid equipment associated with the NGL treating and the 150MMSCFD cryogenic plant.

TIC: 75MM

Texas City, TX

Chemic provided the process, civil/structural, piping, mechanical, instrumentation, and electrical, design and procurement for the installation of a 38 carbon canister skids and a total of 78 RV locations inside an existing facility in Texas City, Texas. Chemic partnered with local fabrication shop to expedite skids seamlessly and on time.

TIC: 15MM

Sweeny, TX

Chemic provided the civil/structural, piping, mechanical, instrumentation, electrical engineering and design for the replacement of two drive in plant access gates inside an existing facility in Sweeny, Texas.

TIC: 1MM

Nederland, TX

Chemic provided the provided the civil/structural, instrumentation, electrical engineering and design for the addition of a 750KW emergency generator inside an existing facility in Nederland, Texas.

TIC: .5MM

Nederland, TX

Chemic provided the provided the civil/structural, instrumentation, electrical engineering and design for the addition of a 750KW emergency generator inside an existing facility in Nederland, Texas.

TIC: .5MM